Edward Fire Alarm Devices

Edwards EST SIGA-CT1 Single Input ModuleThe Edwards / EST SIGA-CT1 Single Input Module is an intelligent analog addressable device used to connect one Class B normally-open Alarm, Supervisory, or Monitor type dry contact Initiating Device Circuits (IDC). The Signature Series modules are compatible only with ESTs Signature Loop Controller.

EDWARDS EST3X is a next generation fire alarm system, with new multi-message displays, innovative controls, intuitive interface, new microprocessors and bold colors. The system follows with the EST3 architecture, having a robust modular control panel that unifies fire alarm, security and mass notification systems. The EST3X fire alarm system remains a leader in the field with the ability to have up to eight panels networked. Making the EST3X an ideal solution for mid to large size facilities. With intelligent devices throughout the network the EST3X system ensures uncompromising quality in the detection of fires in your building. The extensibility of smart devices through the field, plays a key role in the EST3X system in providing additional features such as security and mass notification. Whether you have a new installation or an existing installation, the EST3X is capable of networking with up to 64 additional panels of an EST3 system. This makes the EST3X an ideal control panel for retrofits or additions

Edwards EST 3-CHAS7 takes one chassis space in wallbox, provides space for 7 local rail modules, up to two power supplies, and a 1⁄2 footprint module.

EST3 has a wide selection of cabinet arrangements allowing the greatest use of EST3’s flexible modular design. Lobby enclosure wallboxes are manufactured from #14 AWG cold rolled steel with a gray baked enamel finish. Lobby enclosure doors are manufactured from #14 AWG cold rolled steel and have a modern contoured door design with integral viewing window. The exception is the small lobby enclosure 3-CAB5. The 3-CAB5 wallbox and non-contoured door are #16 AWG cold rolled steel. Lobby enclosure doors come with gray baked enamel or optional red baked enamel finishes. The EST3 lobby enclosures back boxes, doors and chassis units are ordered and shipped separately. The 3-CAB5 lobby enclosure comes complete with door and back box providing space to mount five local rail modules.

The EST3 remote closet cabinet design allows the installation of control panel electronics in electrical closets. The remote closet cabinets have left hand hinged doors and are available with red finish only. Optional display modules used for system diagnostics display, mount behind the closet cabinet door and are not visible with the door closed.

The 3-CPU3 is the Central Processing Unit Module monitoring the status of all modules and providing the link for network communications. Although each local rail card contains their own microprocessor, the 3-CPU3 provides all inter-module communication and has the ability to download rail module operating parameters. Upon power up the 3-CPU3 automatically learns all local rail module attributes and locations. Site specific software is loaded into the 3-CPU3 which then downloads data to each local rail module. Firmware upgrades are also done from the 3-CPU3 eliminating the need to unplug chips on rail modules. Internal rail communications is accomplished in a broadcast protocol for fast response. Mounting must be in the first two local rail spaces. Options for the 3-CPU3 include the addition of an LCD display and User Interface, RS-232 Communication Card, and RS-485 Series Network Communication Cards. The 3-CPU3 is fully compatible with the 3-CPU and 3-CPU1 modules.

EST G1RF-HDVM Multi-candela Horn-Strobe features a selectable 15 cd, 30 cd, 75 cd, or 110 cd output. Operating voltage: 16-33 VDC Horn temporal rate synchronized with optional G1M Genesis Signal Master or G1M-RM Genesis Signal Master Remote.

Smoke Detectors, Heat Detectors, Multi Detectors

Addresable system

EST provides sophisticated building solutions: fire alarm systems, mass notification, fire alarm panels, evacuation panels, UL864 9th edition fire alarms.

The iO-Series panels provide a new standard in small building life safety. This small panel packs a punch and like its larger cousins the EST3 and EST3X it utilizes intelligent detection components to provide unparalleled detection. Whether you're using the iO1000 or iO64 you can take advantage of detectors that continuously tune the detectors sensitivity to meet environmental conditions. These types of innovation reduce the risk of false alarm providing peace of mind to your tenants.

Standard Features

Right or left hand hinging of doors

Lag and Keyway holes for quick mounting

Attack rated door for security applications Knockouts for 3/4 inch conduit

Attractive contour door design on lobby enclosures Combination fl ush or surface mounting lobby enclosure design

Remote closet cabinets for electrical closet mounting support up to 65 AMP hour batteries

EST3X is a next generation fire alarm system, with new multi-message displays, innovative controls, intuitive interface, new microprocessors and bold colors. The system follows with the EST3 architecture, having a robust modular control panel that unifies fire alarm, security and mass notification systems. The EST3X fire alarm system remains a leader in the field with the ability to have up to eight panels networked. Making the EST3X an ideal solution for mid to large size facilities. With intelligent devices throughout the network the EST3X system ensures uncompromising quality in the detection of fires in your building.

The extensibility of smart devices through the field, plays a key role in the EST3X system in providing additional features such as security and mass notification. Whether you have a new installation or an existing installation, the EST3X is capable of networking with up to 64 additional panels of an EST3 system. This makes the EST3X an ideal control panel for retrofits or additions. Leveraging existing fire alarm system infrastructure is a great way to shorten time and costs of your projects.

EST3 is a robust modular control panel that unifies fire alarm, smoke control, security and mass notification systems. The EST3 fire alarm system is a leader in the field with the ability to have network panels with overall length in excess of 300,000 ft. Making the EST3 an ideal solution for any size facility. The EST3 system accomplishes this by using a token ring network delivering fast alarm response times across any size network. With intelligent devices throughout the network the EST3 system ensures uncompromising quality in the detection of fires in your building. The extensibility of smart devices through the field, plays a key role in the EST3 system in providing additional features such as security and mass notification. The EST3 control panel is listed by Underwriters Laboratories (UL) in the categories of fire, smoke control, security and was the first fire alarm system UL listed to the new UL 2572 Mass Notification standard. Whether you have a new installation or an existing EST3 installation, you will be able to leverage the fire alarm system infrastructure for new mass notification requirements. This integration leverages the subsystems of the fire alarm saving time and money in the deployment of smoke control, mass notification and security.

BrandEdwardsModel NoSA- ETHEthernet10/100 Base-TOperating Voltage24 VDCTemperature32 to 120 DegreeF (0 to 49 DegreeC)Humidity0 to 93% RH,noncondensing at 90 DegreeF (32 DegreeC)Cat 5 Cable ConnectorRJ-45Operating CurrentStandby/Alarm 34 mA Max. 41 mA
Operation:
The SA-ETH card provides a standard 10/100 Base-T Ethernet network connection for connecting to a local network. The card can be used for uploading and downloading panel configuration, history, and current status to a PC running the configuration utility or connect to a compatible central monitoring station receiver over a network.

Installation:
The Ethernet card is installed on the plastic assembly and connects to the main circuit board via a ribbon cable.

Note:
The Ethernet card must be configured through programming for proper operation.

To install the Ethernet card:

Power down the panel and disconnect the batteries.

 Locate the card slot on the plastic assembly behind the main circuit board and connector J1 on the main circuit board (at the top-right of the main board).

 Slide the card into the slot on the plastic assembly as show in the diagram.

Attach the card to the plastic assembly using two #6 plastite screws as show in the diagram.

Connect the ribbon cable (P/N 7140189) from the card to connector J1 on the main circuit board. J1 is located on the top-right of the main circuit board.

Connect the network cable. See “Wiring.”7. Power up the panel and connect the batterie

Product Specification Product Description

This card gives an SFS1-CPU main board the ability to network up to 64 nodes on an EST3 network Supports Class B and Class A wiring Provides two independent RS 485 circuits: one for network data communications and one for digital audio communications