Eaton's intelligent addressable wall sounder beacon is available in two variants: an internal (CASB383) and weatherproof (CASB383WP), that is IP66 rated. Both internal and weatherproof are compatible with Eaton's intelligent addressable fire alarm and notification systems.
The CASB383 and CASB383WP are wall mounted with a range of different tones, volume levels, a built short circuit isolator and is soft addressed for ease of installation. The highly efficient design of the wall sounder beacon, offers excellent sound output levels despite ultra-low current consumption. The alarm includes a high powered LED beacon to provide both audible and visual alarm signals, that provides a comprehensive notification device for emergency evacuation.
General Information Part NumberCOFCASB383Brand NameCooperManufacturerCooper Industries plcManufacturer Part NumberCASB383Product TypeSecurity AlarmUPCWeight210 gProduct LineIntelligentProduct NameCASB383 - Intelligent Addressable Wall Sounder BeaconTechnical InformationAlarm TypeAudible, VisualConnectivity TechnologyWiredProduct FunctionsAlarmSound Emission100 dBPower DescriptionInput Voltage32 V DCPower SourceDC SupplyPhysical CharacteristicsApplication/UsageEmergencyColourRed Housing, Red LensDepth95 mmForm FactorWall MountableHeight105 mmWidth105 mmMiscellaneousCompatibilityEaton Intelligent Addressable Fire System
Operating Voltage | 230 V AC, 24 V DC |
Model Name/Number | COFCF30004GNCIND |
Dimension | 397 x 180 x 497 mm |
Phase | 1 - Phase |
Weight | 18 kg |
Number of Sounder Circuits | 4 |
Features | Battery Backup,Touchscreen |
Panel Control Type | Addressable |
The intelligent addressable sensor standardbase (CAB300) has been designed for flexibility,simplicity and speed of installation.
The (CAB300) is compatible with the Cooper rangeof intelligent addressable sensors and fire systems.
This intelligent addressable standard base incorporates a purpose designed shorting link toensure wiring continuity if a sensor is removed.
This device also has a retaining clip to provide positive feedback when the sensor is correctly fitted and a retaining clip that can be replaced with locking device (supplied with base) to prevent unauthorised sensor removal.
General InformationPart NumberCOFCAB300Brand NameCooperManufacturerCooper Industries plcManufacturer Part NumberCAB300Product TypeHeat Detector BaseUPCProduct NameIntelligent Addressable Standard BaseTechnical InformationDevice SupportedHeat DetectorPhysical CharacteristicsColourWhiteDepth22 mmMaterialPolycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS)
Apollo Intelligent Red Open-Area Sounder Beacon - 55000-005APO
The Intelligent Open-Area Sounder Visual Indicator is designed for use in open areas and can be connected to an Apollo Discovery or XP95 system.
Key Features:
This range of intelligent addressable sensors have been specifically designed to operate with Eaton’s Cooper intelligent addressable fire systems. All sensors are third party approved to the relevant section of EN54 (part 7 for smoke detectors & part 5 for heat detectors). The optical sensor (CAP320) is suitable for most applications giving the fastest response to slow burning or smouldering fires which give rise to large visible smoke particles. The photo-thermal sensor (CAPT340) will respond quickly to fast clean burning fires yet maintain the advantage of optical sensors when detecting smouldering fires. The thermal enhancement of this sensor allows a higher alarm threshold which provides a greater rejection of false alarms. The sensor will also raise an alarm at temperatures exceeding 60ºC. The CAPT340 has day/night modes available, programmeable from the site installer software. The day mode uses the heat aspect of the sensor for areas which may have smoky environments during, for example working hours. The night mode uses a combination of A2S and smoke detection. If not programmed, the sensor defaults to dual mode.The heat sensor (CAH330) can be set to one of 3 modes 77ºC / 92ºC and rate of rise. These sensors are designed to be used in environments where the ambient conditions might cause false alarms if smoke detection were to be used, for example where there is a high level of dust, fumes, steam or smoke under normal conditions.
Features:
Benefits:
721-001-301
721-001-301 ZX5Se 1-5 loop control panel. 230Vac, 4 sounder circuits, 4 line display and networking capability. 6 Amp PSU with 460mA loop capability 500 x 500 x 195mm (H x W x D). Order loop cards separately. Languages supplied: English, Italian, Spanish, Portuguese, Polish, Dutch, Slovenian and Croatian.
EVACLITE : 8 Zone Voice Alarm controller with built-in USB, MP3, AM/FM player and 8 zone paging station
Key Features
Agni Make Fire Control Panel
Features:
v Fully Confirm IS 2189.
v Zone Wise Fire Fault LED Indication.
v Zone Isolation Facility.
v Mains on, System On, Charger on, visual indications.
v Auto dialler attachable facility
v External s/w for reset, Silence, Lamp test.
v External s/w to test each zone fire, open, short status manually.
v Inbuilt Buzzer.
v 16x2 Line LCD Display.
v Inbuilt Battery Charger & Battery Space.
v Operates on 230 V AC, 50 Hz AC supply.
v Potential Free Contact Facility.
Technical Specification:
Power I/P
230 V.AC/ 24 V DC
Power Consumption
30 Watt/200 Watt (Normal/Fire)
End Of Line
4 K7
No. Of Zones
2,4
Detection O/P Supply
24 V DC
Hooter O/P Supply
24 V DC
Operating Temperature
0°C to 40°C
Operating Humidity
95% (non-condensing)
Mechanical Specification:
Cabinet Type
MS
Colour
Off White
Paint
Powder Coating
Knock Out
20 mm
Dimension
11”x13”x4”
Weight
5.2 Kg Without Battery
The Manual Call Point is used to manually initiate an alarm signal on the fire detection system.
Mechanical | ColourRedWeight180gMaterials housingPolycarbonateProduct length90mmProduct width90mmProduct depth63mmKey typeApollo Manal Call Point reset keyProduct length3.54inProduct width3.54inProduct depth2.48in |
---|
Eaton has two intelligent addressable callpoints, the standard addressable callpoint (CBG370S) which can be either surface or flush mounted and the weatherproof variant (CBG370SWP) which is built for external environments. Both callpoints are compatible with Eaton's intelligent addressable fire systems and provide attractive, clear design for use in emergency evacuations.
The CBG370S and CBG370WP are both simple to install and are supplied with a standard frangible glass element and test key for easy maintenance.
A comprehensive range of accessories are available including protective hinge covers, spacer plates, recessing bezels, resettable element kit and spare glass making the Eaton addressable range suitable to all commercial and industrial build needs.
General Information Part NumberCOFCBG370SBrand NameCooperManufacturerCooper Industries plcManufacturer Part NumberCBG370SProduct ModelCBG370SProduct TypeManual Call PointUPCWeight200 gProduct NameCBG370S Manual Call PointTechnical InformationFeaturesHeavy Duty, Surface MountPhysical CharacteristicsColourRedDepth57 mmHeight87 mmMaterialAcrylonitrile Butadiene Styrene (ABS)Width87 mmMiscellaneousApplication/UsageFire AlarmPackage Contents
Eaton has two intelligent addressable callpoints, the standard addressable callpoint (CBG370S) which can be either surface or flush mounted and the weatherproof variant (CBG370SWP) which is built for external environments. Both callpoints are compatible with Eaton's intelligent addressable fire systems and provide attractive, clear design for use in emergency evacuations.
The CBG370S and CBG370WP are both simple to install and are supplied with a standard frangible glass element and test key for easy maintenance.
A comprehensive range of accessories are available including protective hinge covers, spacer plates, recessing bezels, resettable element kit and spare glass making the Eaton addressable range suitable to all commercial and industrial build needs.
The CAS381 wall sounder and the CAS381WP weatherproof wall sounder provide a balanced mix of excellent sound output levels and ultra-low current consumption- providing low ongoing cost but comprehensive coverage in an emergency evacuation.
Both Eaton's intelligent addressable wall sounders are wall surface mounted with a choice of different tones, volume levels, built in short circuit isolator and soft addressing for ease of installation. The CAS381WP is IP66 rated and suitable for use in areas of high levels of dust as well as outside.
WSO-PR-N00 & I00
High quality loop powered device designed to alert building occupants of an emergency. Featuring fast and simple installation and control it is powered by the fire panel via the loop wiring. Control of the device is enabled using on-board switches or via the digital protocol using the control panel.
WSO-PR-N00 - Red Wall Mount Sounder, with pure white skirt - non isolated.
WSO-PR-I00 - Red Wall Mount Sounder, with pure white skirt - isolated.
The range is installed simply by a twist fit onto the B501AP base.
EDWARD MULTI DETECTOR
Intelligent MULTI Detector SIGA-PHS
The Signature Series SIGA-DHI xed temperature/rate-of-riseheat detector brings advanced sensing technology to a practi-cal design that increases ef ciency, saves installation time, cutscosts, and extends property protection capabilities. Continuousself-diagnostics ensure reliability over the long-haul, while highlystable communications means these detectors can be installed onexisting wiring for most retro???t installations — no special twisted orshielded cable required. The SIGA-DHI monitors the air temperature near the detector, andthe rate at which this temperature rises by analyzing data from itson-board thermistor. The rate-of-rise function can quickly detect afast, aming re, while the xed-temperature threshold detects rewhen the air temperature near the detector exceeds the pre-setalarm point.Like all Signature Series detectors, the SIGA-DHI is an intelligentdevice that gathers analog information from its heat sensors,converting this data into digital signals. To make an alarm decision,the detector’s on-board microprocessor measures and analyzessensor readings and compares this information to historical data.Digital ???lters remove signal patterns that are not typical of ???res,thus virtually eliminating unwanted alarms.
Standard Signature Series Features
• Fixed temperature and rate-of-rise heat detection• Uses existing wiring• Ground fault detection by module• Up to 250 devices per loop (125 detectors and 125 modules)• Non-volatile memory• Electronic addressing• Standard, relay, fault isolator, and audible mounting bases• 50 foot (15.2 meter) spacing• 15 °F (8 °C) per minute rate-of-rise alarm point• 130 to 140°F (54 to 60°C) ???xed temperature alarm point• Bicolor (green/red) status LED• UL521 Listed• Normal Polling Flash
GST200N Series Intelligent Fire Alarm Control Panel |
Feature GST200N Series Panel contains 1 loop version GST200N-1, 2 loops version GST 200N-2 and severail other language variant models. 1 loop model can be extended to 2 loops by using an additional loop card (LC200).
Standard: EN54 Part 2/4 |
GST200N Series Intelligent Fire Alarm Control Panel |
Feature GST200N Series Panel contains 1 loop version GST200N-1, 2 loops version GST 200N-2 and severail other language variant models. 1 loop model can be extended to 2 loops by using an additional loop card (LC200).
Standard: EN54 Part 2/4 |
OneMini, is the fire alarm control panel of the future, completely made in Italy. Created from the first alarm control panel with touch-screen technology TeledataOne, OneMini represent a compact and cost effective solution certified EN 54-2 and 4. The GUI interface is user friendly, you can program the panel without a manual. The levels of access are three, and are designed to be extremely user friendly to each type of OPERATOR (installer, Head of Security and End User) .OneMini is 1 loop multiprotocol, settable with Argus or Apollo protocol. With one panel you can connect up 240 devices on the loop. If you want to interface still more devices you can create a ring of OneMini or Teledata One through the One Ring, so your building will be even more secure.
OneMini allows to use wired devices and wireless devices in the same system. OneMini records each alarm and fault, they are visible into “historical events” menu, where you can filter all the event by date , events , zones and loops.
The export from OneMini of devices diagnostics, configuration and historical events is very easy with a USB pen drive. OneMini also have a unique design , Teledata can customize the central panel inserting the logo of your company. OneMini is an international product, it manages 111 languages and their alphabets.
To make the programming even more easy to use there is OneCloud, which represent the new area of commissioning. It empower live remote support as It allow to configure the panel from any device (PC, smartphone, tablet…) comfortably, far from panel, and import the configuration on your OneMini; so easy with a USB pendrive.
HARDWARE Features
• Addressable 32-bit microprocessor panel with graphical
touchscreen display (480 x 272 TFT 4.3 “)
• 1 addressable loop with digital protocol configurable as open or
closed
• 240 addressable devices on loop
• Up to 14 remote control panels can be connected to the RS485
BUS max 800m distance (cod. Art. ONE KBD)
• Short circuit protection
• 14 Front LEDs
• 2 monitored output for siren or optical-acoustic signaling (24Vdc
1A)
• General clean contact output 1A 30Vdc 120 Vac
• 1 general fault output
• 1 RS 485 for peripherals
• 1 RS 232/micro USB for programming and remote management.
• Ethernet card 10-100 Mbit/s (optional cod. Art. PTLAN)
• 16 LED zones
• Ring network adapter between panels (optional cod. Art.
ONERING)
• Battery capacity: 2 x 7.2 Ah
• Efficiency test batteries and battery disconnection in case of
deep discharge
• Operatin temperature from 0° to 50° degrees
• Auxiliary power output 24 Vdc 500mA with short protection
• Dimensions: 330 x 310 x 80 mm
• Power supply: 230Vac
SOFTWARE Features
• Up to 240 addressable devices for the loop
• hybrid yarns/radio
• Division up to 192 areas
• 96 logic functions
• Store more than 1000 events
• Auto programming analog devices on loop
• Auto addressing analog devices on loop
• Mapping analog devices on loop
• Ring connecting with other central using a fault tolerant network
• Multilingual management
• Fully customizable with personal logo, Color
• Touch screen and side multi-color LED
• Management of detectors and analog modules of different type
thermal and optical detectors mixed
Input Modules
Output Modules
buttons addressed
Analog Addressable sirens multiprotocol
• Selectable colored LED
• TCPIP Protocol MODBUS/MODBUS RTU over TCP IP (optional
cod. Art. MCGTWMDB)
• Certified Product Standards EN54-2 and EN54-4
Feature
GST200N Series Panel contains 1 loop version GST200N-1, 2 loops version GST 200N-2 and severail other language variant models. 1 loop model can be extended to 2 loops by using an additional loop card (LC200).
Maximum loop capacity 477 intelligent devices 1 loop model loop capacity is 235 intelligent devices
Wide range power supply
Multiple language options
30 logical configurable zones
PAS and Acknowledge Function
Dirty Detector Reporting
Walk Test Function
Graphical LCD Display
Zone indication and manual intervention panel
Net-workable
Programmable from PC
Built-in RS485 repeater output (Maximum 10 repeaters)
Optional GMC graphic station
Optional Panel Printer
Advanced user friendly programming software including ‘Fuzzy Logic’
Optional protection of re-programming
Approved by LPCB
Technical Specifications
Standard: EN54 Part 2/4
Main Input Voltage: 100-240VAC, 50/60Hz
Input Current Rating: 0.5A
System Operating Voltage: 24 VDC Nominal
Loop Capacity: Loop 1: 235; Loop 2: 242
Outputs (3):
Fire Alarm Output: 500mA /24Vdc/NO-NC
F.P.E. Output: 500mA /24Vdc/NO-NC
Sounder Circuit Output: 500mA /24Vdc/NO-NC
Dimension: (HWD) 580 x 420 x 202 mm
Brand | Edward |
Usage/Application | Office Buildings |
Color | White |
Automation Grade | Automatic |
Material | Plastic |
Frequency | 50 Hz |
Alarm Current | 68 uA |
Air Velocity | 0 to 20.32 m/s |
Vibration Level | 10 to 35 Hz |
Rate of Rise Rating | 15 deg F/min |
Storage Temperature | -20 to 60 deg C |
Minimum Order Quantity | 5 Unit |
Conventional Fire Alarm Systems. Conventional fire alarm systems consist of manual call points, fire detectors, sounders, beacons, and other devices grouped into zones. Conventional panels can only narrow down the location of a possible fire or fault as being somewhere within one or more zones.
With the valuable assistance of skilled team of professionals, we are engaged in offering an extensive range of high-quality Electronic Fire Alarm Panel.
FST-851 Series Heat Detectors.
Notifier FST-851AUS Series intelligent plug-in thermal detectors with integral communication has features that surpass conventional detectors. Point ID capability allows each detector’s address to be set with decade address switches, providing exact detector locations. FST-851AUS Series thermal detectors use an thermistor sensing circuit to produce 57°C fixed-temperature (FST-851AUS) and rate-of-rise thermal detection (FST-851RAUS) and FST-851HAUS provides fixed high-temperature detection at 88°C.
These thermal detectors provide effective, intelligent property protection in a variety of applications. FST-851AUS Series detectors are compatible with Notifier Onyx and CLIP series Fire Alarm Control Panels (FACPs).
Features
Features:
•Photoelectric sensor.
•Wall or ceiling mounted.
•Wall or ceiling mounted Wall or ceiling mounted.
•Tamper resistant pins for batteries.
•Auto reset after smoke clears.
•Auto check malfunction in smoke chamber.
•Green LED flashes once every 45s to indicate standby state.
•RED LED flashing and buzzer sounding for alarm indication.
•Low battery warning.
•Dust-proof, mothproof Design.
•Anti white light interference.
•Anti RF Interference (20v/m-1 GHz).
Product Specification:-