Ravel Fire Alarm Devices

Product SpecificationMaterialABS PlasticOperating Temperature Range-20 to +55 Degree CBrandRavelModel NumberRE-428FROperating Voltage14 to 36 VDCOperating current5mAFast Alignment Mode33mAStorage temperature-40 to +85 Degree CProduct Description
Owing to devoted experts, we have been competent to present a wide range of RE-428FR Ravel Beam Detector. These products are made as per industry norms and standards.

We are Authorized Associate Partner of Ravel  make Fire Alarm & Detection System which are designed to service the Residential, Commercial & Industrial application. We are offering Conventional & Addressable Fire Alarm System that includes Fire Alarm Panel, Repeater Panel, Smoke Detector, Heat Detector, Manual Call Points, Hooter, Fire Alarm Cables etc.These Fire Alarm System made of best advanced technology & meeting International Standards & Certifications like UL,CE etc considering Safety & Security into account.These systems are easy to install, reliable, long service life & having superior quality.

Our Quality Policy :
: Best Quality Products
: Cost Effective Solution
: Technical Assistance
: Customer Satisfaction
: Building Customer Loyalty
: Long Term Association

• EN54-11 Approved Type A Indoor Use.
• Re-Settable by an element kit.
• Suitable for flush or surface mounting
• Module Addressing by 8 way DIP Switches.
• Low Standby Current.

• Operating Voltage	:	24VDC.
  Power-up surge current	:	0.8mA
  Quiescent Current	:	0.5mA.
  Alarm Current	:	5.8mA

• Temperature	:	0 49 C
  Relative Humidity	:	0 93% non-condensing
  Connection	:	2.5mm2 Max.
  Weight	:	125g.
  IP Rating	:	IP 53
  Dimension	:	92mm X 92mm X 48 mm

   

UL Listed Analogue addressable Heat detector with fixed temperature of 59 degree Centigrade and Rate of raise facility of 11.1.Deg C /min with 8 digit dip switches for ( 1 to 254) address settings,Dual LED indication for 360 degree visibility ,milky white in colour,shall be polarity insensitive.easy to install,advanced detection and communication protocol.

UL listed control relay module with dual potential free contact to integrate with any third party systems having RED coloured LED for status indications with 8 digit Dip switch for address settings.

Operating Voltage	:	24 VDC Nominal
Current Draw	:	2 mA Max.(Latched)
Standby Current	:	0.5 mA
Contact Rating	:	2A @ 30VDC(Resistive)
Temperature Range	:	0°C to 49°C./ 32°- 120°F
Humidity	:	93 ± 2% RH (non-condensing) at 32 ±2° C / 90 ±3° F.

Zone interface module used to connect the conventional smoke,heat and multi sensor detector to addressable fire alarm control panels also the module is used to integrate with Beam detectors to addressable fire alarm system.Shall have RED colored LED for status indications with 8 digit DIP switch for address settings.

• Indian Manufacturer – International standard.
• UL Certified (9th Edition)
• Touch Keypad for user friendly operation.
• Inbuilt USB.
• Universal Switched Mode Power Supply.
• Modular Construction, Serviceability.
• Networkable.
• Auto Resettable Fuse.
• Surge Protection.
• Battery polarity protection.
• 32 Bit processor.
• Unique protocol feature for fast alarm response.
• Inbuilt conventional circuit.
• Auto learning facility.
• 1016 Devices of any combination per panel.
• Multi protocol.
• Peer to Peer Networking.
• Redundancy : If the main CPU fails, it will raise an alarm like conventional panel.
• User friendly circuit.
• Device / Detector wise configuration facility.
• 2000 Event Storage with Real Time Clock.
• Upto 192 grouping facility.
• Pre Alarm Action.
• All field wiring are power limited and supervised.
• Programmable detector sensitivity.
• Device type verification.
• Earth fault annunciation facility at 0 ohms.
• Double Address Sensing.
• Loop wise device test .
• 40 X 4 Characters LCD display
• Maximum 4 numbers of loop card with Class A, Style 5,6 or 7 and Class B Style 4 wiring
• Maximum 254 devices (any combination) per loop.
• Day / Night Mode facility.
• USB 2.0 Interface for PC connectivity (A to B Type).
• RS 485 Communication facility for Network / Repeater/ MODBUS / BACnet.
• Programmable Auto Silence Facility / AC Loss Delay / Silence Inhibit.
• Two no’s of programmable inputs.
• Battery low audio, visual warning.
• Three programmable Form C relay for Fire, Fault and Supervisory.

Product Specification Product Description

We are the leading provider of RE-716P-1t Ravel Manual Pull Stations.  These products are identified amid patrons for their noticeable features such as longer life, durability and nominal cost.

Details:

• Lift and pull
• Break glass cover
• Weather and Explosion proof versions(optional).
• All stations offer hex screw or key lock access

Additional Information

UL Listed Analogue addressable Multi Sensor detector with smoke detector and the combination of heat detector with fixed temperature of 59 degree Centigrade and Rate of raise facility of 11.1.Deg C /min with 8 digit dip switches for ( 1 to 254) address settings. Dual LED indication for 360 degree visibility, milky white in color, shall be polarity insensitive, easy to install, advanced detection and communication protocol with insect filter chamber.

UL listed Monitor Module is applicable to monitor any third party devices integration to monitor the change of state from Normally open to normally close.Having supervisory feature to supervise the circuit connected with third party system having RED colored LED for status indications with 8 digit Dip switch for address settings.

Operating Voltage	:	24 VDC Nominal.
Alarm Current	:	2.7 mA Max.(Latched)
Standby Current	:	0.7 mA
End of Line Resistor	:	47K Ohms
Communication Line Loop Impedance	:	40 Ohms
IDC wiring Resistance	:	100 Ohms Max.
IDC Voltage	:	8 V Max.
Temperature Range	:	0°C to 49°C / 32°- 120°F
Humidity	:	93 ± 2% RH (non-condensing) at 32 ±2° C / 90 ±3° F

Usage/ApplicationFire Alarm SystemBrandRAVELTypeHeat DetectorModel Name/NumberRE-337HCertificationCE APPROVEDAlarm Current7maWeight150gm with baseColorWHITEMaterialABSDimensions100MM/46MMWarranty1 YEARI Deal InNew OnlyMinimum Order Quantity500 Piece Product DescriptionOperating Voltage : 17 ~ 28V DC Reset Voltage : less than 5V Start-Up Current : 800 uA. Start-Up Time : less than 30s. Alarm Current : 7 mA. Reset Time : less than 30s. Sampling Time : less than 1s. Remote Output : 2mA maximum open collector Thermal Rating O O Fixed Temperature : 59 C (138 F) O O Rate of Raise of Temp : 11.1 C / min (20 F/min) O O Operating Temperature : -10 C to 50 C Humidity : 0 - 95% RH, non-condensing
Additional Information Item CodeRE-337H

The isolator module to be installed between every 16 nos. of devices to isolate the circuit from single short circuit on the analogue addressable loop cable, this is non addressable device with yellow LED for status indications.

Product Specification MaterialABSMounting TypeSurface MountedSound Level85 dBModel Name/NumberRE-24CSOperating Temperature0 to 49 Degree CBrandRavelShapeRectangleOperating Voltage24 VOperating Current40 mASounder TypePiezo Electric TypeDimensions96 X 76 X 28 mmMinimum Order Quantity100 Piece Product Description
Due to our proficiency of this field, we are engaged in presenting Ravel Fire Alarm Hooter. We are presenting these products to customers within given time-frame.

Details:

Slim and Sleek

Wall or Ceiling mountable

Mini Horn with BackBox

They are used in Fire, Burglar & Emergency Alarm System.

Additional Information Delivery TimeREADY STOCK

Product Specification Product Description

We are offering an extensive series of RE-RI Ravel Response Indicator Fire Alarm System. These products are extremely employed in the market for diverse purposes.

Additional Information

Product Specification Product Description
Additional Information

• Easy to install.
• Operates on 24VDC
• 100db at 30cm.
• Low Current.
• Ceiling / Flush Wall Mount.

• Material	:	FR ABS Plastic
  Input Voltage	:	24V DC (15-30V)
  Current	:	100 mA @24V
  Relative Humidity	:	93 +- 2 @ 32OC
  Operating Temperature	:	-10 to 50OC
  Sound Level	:	88 db +/- 5dB @ 30cm
  Tone Type	:	1. Ambulance 2. Police car 3. Fire Engine
  Size	:	126(W)*126(H)*55(D)mm

1. Electrical Specification

 

Mechanical Specification

 

Compatible Devices

 

Ordering Information

 

Note :
* By default Repeater panel is designed for Wall mounting only.
* If Specified Repeater panel will be designed for Flush Mounting.
* W – White Color ; R – Red Color ; B – Black Color

•  

• Addressable System 
• Conventional Fire System 
• Gas Suppression System 
• Public Address System 
• Fireman Telephone System

• Wall or Ceiling mountable
• Mini Horn with BackBox
• 24VDC Operation
• They are used in Fire, Burglar & Emergency Alarm System.

The microprocessor based 4 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 4 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-104 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

Agni make 10 Zone Conventional Fire Alarm Panel

Features:
v  Fully Confirm IS 2189.
v  Zone Wise Fire Fault LED Indication.
v  Zone Isolation Facility.
v  Mains on, System On, Charger on, visual indications.
v  Auto dialler attachable facility
v  External s/w for reset, Silence, Lamp test.
v  External s/w to test each zone fire, open, short status manually.
v  Inbuilt Buzzer.
v  16x2 Line LCD Display.
v  Inbuilt Battery Charger & Battery Space.
v  Operates on 230 V AC, 50 Hz AC supply.
v  Potential Free Contact Facility.
Technical Specification:
Power I/P
230 V.AC/ 24 V DC
Power Consumption
30 Watt/200 Watt (Normal/Fire)
End Of Line
4 K7
No. Of Zones
2,4
Detection O/P Supply
24 V DC
Hooter O/P Supply
24 V DC
Operating Temperature
0°C to 40°C
Operating Humidity
95% (non-condensing)
 
 Mechanical Specification:
Cabinet Type
MS
Colour
Off White
Paint
Powder Coating
Knock Out
20 mm
Dimension
11”x13”x4”
Weight
5.2 Kg Without Battery

UL Listed Control Module to integrate with Conventional Audible devices like Sounder,Sounder cum strobe,strobe,bell etc., Also having supervisory features for NAC circuit as well as the power supply input.Capable to connect multiple notification devices in single module having RED colored LED for status indications with 8 digit Dip switch for address settings.

UL Listed Analogue addressable smoke detector with 8 digit dip switches for ( 1 to 254) address settings,Dual LED indication for 360 degree visibility ,milky white in color,shall be polarity insensitive, Insect filter chamber, easy to install, advanced detection and communication protocol.

The microprocessor based 2 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-102 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

The RE 316S-2L conventional detectors are designed to work with ... It has an unique protocol chamber designed to sense smoke produced by wide Conventional smoke Detectors

We are successfully meeting the requirements of our clients by offering the best quality range of RE 316S-2L Photo Electric Smoke Detector With Base.

Features:

• UL listed
• Dual LED’s for 360° visibility
• Advanced detection and communication protocol
• Easy installation and maintenance
• Sleek low-profile housing design
• Regular 100mm base

The microprocessor based CE mark 12 Zone conventional fire alarm control panel, the system has 20 X 4 LCDcharacter with alpha numeric touch key pad, 12 zones detection circuit, 3 common programmable potential free contacts & 2 common NAC sounder output, inbuilt Rs-485 for Networking – TCP/IP, peer to peer & repeater connectivity, central monitoring facility, inbuilt RTC with Event logs, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-900 Series fire alarm control panel is designed with unique protocol to be used for small, medium & Large establishments, Schools, hospitals, hotels, banks, residential / commercial building, and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

Product SpecificationSystem ComponentsFire Alarm Control PanelTypeConventionalMaterialMild SteelColorGreyUsage/ApplicationOfficeBrandRavelModel Name/NumberRE-120GRPower220-240 V ACFrequency50 HzOperating Temperature0 to 49 Degree CRelative Humidity93%Operating Current0.75 AIP RatingIP50Weight7 KgMinimum Order Quantity1 PieceProduct Description
As a customer-focused organization, we are providing a wide array Ravel 2 Zone Gas Release Panel. In addition to this, we are providing these products at very leading prices.

Product TypeMONITI RAVEL ADDRESSABLE MULTI SENSORBrandRAVELUsage/ApplicationOffice BuildingsAlarm Sensor TypePhotoelectricPower SourceDCAutomation GradeAutomaticMaterialABSIs It Ce CertifiedCe Certified2/4 Wire2 WIREMinimum Order Quantity1 Piece Product Description
Complies with EN 54. CE Approved. ? O ?Dual LED's for 360 visibility. ?Advanced detection and communication protocol. ?Stable photoelectric smoke chamber. (No adjustment or replacement required.) ?Easy installation and maintenance. ?Sleek low-profile housing design. ?Regular 100mm base. Simple soft address programming for easy installation..

Product SpecificationSystem ComponentsGas Sapresion PanelProduct TypeAGENT GAS RELEASE PANELUsage/ApplicationCommercialBrandRavelTypeConventionalZones4 ZONEBody MaterialM S BodyNumber Of Zones4 ZONESNo Of Relays3Model Name/NumberRE-25AROperating Voltage14 - 21 V DCAlarm Current15 - 30 mAShort Circuit Current45 mALoop Resistance100 ohmsOperating Temperature0 to 49 Degree CRelative Humidity93%IP RatingIP50Minimum Order Quantity1 PieceProduct Description
We are an accomplished organization which has gained name and fame in providing Ravel 4 Zone Gas Release Panel to the customers.

Additional InformationItem CodeRE-25AR

Product Specification Product TypeRE-326-S2L RAVEL SMOKE DETECTORBrandRavelUsage/ApplicationOffice BuildingsAlarm Sensor TypePhotoelectricPower Source24 VOLTColorWHITEAutomation GradeAutomaticMaterialABSWarranty1 YEARFire ResistanceYesInstallation ServiceYesCountry of OriginMade in IndiaMinimum Order Quantity1 Piece Product Description
Operating Voltage:9 ~ 33V DCOperating Temperature:-10 °C to 37.8 °CStorage Temperature:-10 °C to 60 °CHumidity:0 – 95% RH, non-condensingReset Voltage:less than 1VStandby Current:-50 μA.Start up Time:60s.Start-Up Current:170 μA.Alarm Current:90 mA.(Max).Remote Output:15mA maximum open collectorSmoke Sensitivity:(1.96 ± 0.76) % / ftAir Velocity:0 – 4000 fpm.Cycle time:5 SecInstallation Space:5 meters

Additional Information Delivery Time2-3 DAYS

The microprocessor based UL listed 8 Zone conventional fire alarm control panel, the system has 16 X 2 LCD character, 8 zones detection circuit,3 common potential free contacts &2 common NAC sounder output, inbuilt Rs-485 for repeater connectivity, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-2558 fire alarm control panel is designed with unique protocol to be used for small & medium establishments, Schools, hospitals, hotels, banks, residential / commercial building, and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

Features

• Complies with EN 54.
• Dual LEDs for 360 visibility.
• Advanced detection and communication protocol.
• Stable photoelectric smoke sensing chamber. No adjustment or replacement required
• Polarity insensitive.
• Easy installation and maintenance.
• Sleek low-profile housing design.
• Regular 100mm base.
• Simple Soft address programming for Easy installation.

The microprocessor based 2 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-102 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

Product Specification Product Description

We are the leading provider of RE-716P-1t Ravel Manual Pull Stations.  These products are identified amid patrons for their noticeable features such as longer life, durability and nominal cost.

Details:

• Lift and pull
• Break glass cover
• Weather and Explosion proof versions(optional).
• All stations offer hex screw or key lock access

Additional Information

Product Specification

Conventional Hooter